Skip to content Skip to footer

Premature Neonatal Incubator AG-IIR001B

Compare
Category: Product ID: 13863

Description

Premature Neonatal Incubator AG-IIR001B

Model:AG-IIR001B

Brand: Advanced Health Canada

Country of origin: CANADA

AG-IIR001B Premature Neonatal Incubator features a microprocessor-based servo-controlled temperature system for your peace of mind. You’ll be able to easily adjust the humidity levels as needed, and the set temperature, air temperature, and heating power are all displayed separately on LED screens. Plus, this neonatal incubator features self-testing and various failure alarms with both audible and visual indicators.

Besides, this neonatal incubator is the basic baby incubator for NICU. You can adjust the inclination of the infant bed and get triple protection for OVER-temperature with a separate cut-off device, which is a more safe system.

Functions

  1. Microprocessor-based servo-controlled temperature system
  2. Control modes: Air mode
  3. Humidity is adjustable continuously
  4. Set temperature, air temperature, heating power are displayed separately by LED
  5. Self-testing function, various failure alarms by audible and visual
  6. Alarm function: Power failure, Over temperature, Temperature deviation, Fan failure, Temperature sensor failure
  7. >37℃ temperature set function
  8. Triple protection for over temperature with separate cut-off device, more safety system
  9. The inclination of the infant bed is adjustable
  10. Single wall hood,4 operating windows, and 2 iris ports,3 infusion seals independent locking device for front door
  11. RS232 connector, Oxygen inlet,1 tray

Specification

Model AG-IIR001B Premature Neonatal Incubator
Power ~ 220V 50Hz
Input power 650VA (including power output socket power: 200VA)
Temperature 20 ° C ~ 30 ° C
Humidity 30% RH ~ 75% RH
Air pressure 700hPa ~ 1060hPa
Air velocity less than 0.3m/s
Box temperature 25 ° C ~ 37 ° C; 37.1 ° C ~ 38 ° C
Warm-up time ≤ 45 minutes
Box temperature over temperature 38 ° C (power off the heater) sound and light alarm
The second thermal cut-off device over-temperature alarm 40 ° C (cut off the heater power supply) sound and light alarm
Box temperature deviation ±3.0 °C (power off the heater at +3.0 °C) sound and light alarm
Sensor alarm When the box temperature sensor is open or short circuit, the heater power supply is cut off, and the sound and light alarm are given
Power interruption alarm power interruption, sound and light alarm
Fan failure The fan stops and its sensor system fails, the sound and light alarms, and the heater power is cut off
The maximum carbon dioxide concentration 0.4% (tested in accordance with the provisions of Article 105.1 of GB11243-2008)
  Less than 55dB (A-weighted)